View IDT74FCT163344APA_880950.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IDT74FCT163344/A/C 3.3V CMOS ONE-TO-FOUR ADDRESS/CLOCK DRIVER
INDUSTRIAL TEMPERATURE RANGE
3.3V CMOS ONE-TO-FOUR ADDRESS/CLOCK DRIVER
IDT74FCT163344/A/C
FEATURES:
- - - - - - - - - 0.5 MICRON CMOS Technology Typical tSK(o) (Output Skew) < 250ps ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) VCC = 3.3V 0.3V, Normal Range or VCC = 2.7V to 3.6V, Extended Range CMOS power levels (0.4 W typ. static) Rail-to-Rail output swing for increased noise margin Low Ground Bounce (0.3V typ.) Inputs (except I/O) can be driven by 3.3V or 5V components Available in SSOP, TSSOP and TVSOP Packages
DESCRIPTION:
The FCT163344/A/C is a 1:4 address/clock driver built using advanced dual metal CMOS technology. This high-speed, low power device provides the ability to fanout to memory arrays. Eight banks, each with a fanout of 4, and 3-state control provide efficient address distribution. One or more banks may be used for clock distribution. The FCT163344/A/C have series current limiting resistors. These offer low ground bounce, minimal undershoot and controlled output fall times, reducing the need for external series terminating resistors. A large number of power and ground pins ensure reduced noise levels. All inputs are designed with hysteresis for improved noise margins. The inputs of the FCT163344/A/C can be driven from either 3.3V or 5V device. This feature allows the use of these devices as translators in a mixed 3.3V/5V supply system.
FUNCTIONAL BLOCK DIAGRAM
OE1
1 2 8 6
OE3 B11 A5 B14
36
29 34
B51
A1
30
B54
41
9
B21 A6
42
B61
A2
14 13
37
B24
B64
OE2
28 16
OE4 B31 A7
20 43
56 48
B71
A3
15
B34
23
44
B74
B41 A8
49
55
B81
A4
21 27
51
B44
B84
INDUSTRIAL TEMPERATURE RANGE
1
c 1999 Integrated Device Technology, Inc.
JUNE 2000
DSC-3249/-
IDT74FCT163344/A/C 3.3V CMOS ONE-TO-FOUR ADDRESS/CLOCK DRIVER
INDUSTRIAL TEMPERATURE RANGE
PIN CONFIGURATION
OE1 B11 B12 GND B13 B14 VCC A1 B21 B22 GND B23 B24 A2 A3 B31 B32 GND B33 B34 A4 VCC B41 B42 GND B43 B44 OE2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 SO56-1 15 SO56-2 SO56-3 16 17 18 19 20 21 22 23 24 25 26 27 28 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 OE4 B81 B82 GND B83 B84 VCC A8 B71 B72 GND B73 B74 A7 A6 B61 B62 GND B63 B64 A5 VCC B51 B52 GND B53 B54 OE3
ABSOLUTE MAXIMUM RATINGS(1)
Symbol VTERM(2) VTERM(3) VTERM(4) TSTG IOUT Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max -0.5 to +4.6 -0.5 to +7 -0.5 to VCC+0.5 -65 to +150 -60 to +60 Unit V V V C mA
3v16-link
NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. Input terminals. 4. Outputs and I/O terminals.
CAPACITANCE (TA = +25OC, f = 1.0MHz)
Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 3.5 Max. 6 7 Unit pF pF
NOTE: 1. This parameter is measured at characterization but not tested.
PIN DESCRIPTION
Pin Names OEx Ax Bxx Description 3-State Output Enable Inputs (Active LOW) Inputs 3-State Outputs
FUNCTION TABLE
Inputs OEx L L H
NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance
Ax L H X
Outputs Bxx L H Z
SSOP/ TSSOP/ TVSOP TOP VIEW
2
IDT74FCT163344/A/C 3.3V CMOS ONE-TO-FOUR ADDRESS/CLOCK DRIVER
INDUSTRIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified: Industrial: TA = -40C to +85C, VCC = 2.7V to 3.6V
Symbol VIH VIL II H II L IOZH IOZL VIK IODH IODL VOH Parameter Input HIGH Level (Input pins) Input HIGH Level (I/O pins) Input LOW Level (Input and I/O pins) Input HIGH Current (Input pins) Input HIGH Current (I/O pins) Input LOW Current (Input pins) Input LOW Current (I/O pins) High Impedance Output Current (3-State Output pins) Clamp Diode Voltage Output HIGH Current Output LOW Current Output HIGH Voltage VCC = Min., IIN = -18mA VCC = 3.3V, VIN = VIH or VIL, VCC = Min. VIN = VIH or VIL VCC = 3V VIN = VIH or VIL VOL Output LOW Voltage VCC = Min. VIN = VIH or VIL VCC = 3V VIN = VIH or VIL IOS VH ICCL ICCH ICCZ Short Circuit Current(4) Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC VCC = Max., VO = GND(3) -- -60 -- -- -135 150 0.1 -240 -- 10 mA mV A IOL = 0.1mA IOL = 16mA IOL = 24mA IOL = 24mA -- -- -- -- 0.2 0.3 0.3 0.2 0.4 0.55 0.5 V VO = 1.5V(3) IOH = -0.1mA IOH = -3mA IOH = -8mA VCC = 3.3V, VIN = VIH or VIL, VO = 1.5V(3) VCC = Max. VCC = Max. VI = 5.5V VI = VCC VI = GND VI = GND VO = VCC VO = GND -- -- -- -- -- -- -- -36 50 VCC+0.2 2.4 2.4(5) -- -- -- -- -- -- -0.7 -60 90 -- 3 3 1 1 1 1 1 1 -1.2 -110 200 -- -- -- V mA mA V A A Guaranteed Logic HIGH Level Test Conditions(1) Guaranteed Logic HIGH Level Min. 2 2 -0.5 Typ.(2) -- -- -- Max. 5.5 Vcc+0.5 0.8 V Unit V
NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 3.3V, +25C ambient. 3. Not more than one output should be tested at one time. Duration of the test should not exceed one second. 4. This parameter is guaranteed but not tested. 5. VOH = Vcc -0.6V at rated current.
3
IDT74FCT163344/A/C 3.3V CMOS ONE-TO-FOUR ADDRESS/CLOCK DRIVER
INDUSTRIAL TEMPERATURE RANGE
POWER SUPPLY CHARACTERISTICS
Symbol ICC ICCD Parameter Quiescent Power Supply Current TTL Inputs HIGH Dynamic Power Supply Current(4) VCC = Max. VIN = VCC -0.6V(3) VCC = Max. Outputs Open OEx = GND One Input Bit Toggling Four Output Bits Toggling 50% Duty Cycle VCC = Max. Outputs Open fi = 10MHz 50% Duty Cycle OEx = GND One Input Bit Toggling Four Output Bits Toggling VCC = Max. Outputs Open fi = 2.5MHz 50% Duty Cycle OEx = GND Eight Input Bits Toggling Thirty-Two Output Bits Toggling VIN = VCC VIN = GND Test Conditions(1) Min. -- -- Typ.(2) 2 230 Max. 30 320 Unit A A/ MHz
IC
Total Power Supply Current(6)
VIN = VCC VIN = GND VIN = VCC -0.6V VIN = GND
--
2.3
3.2
mA
--
2.3
3.2
VIN = VCC VIN = GND VIN = VCC -0.6V VIN = GND
--
4.6
6.4
--
4.6
6.5
NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 3.3V, +25C ambient. 3. Per TTL driven input; all other inputs at VCC or GND. 4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations. 5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested. 6. IC = IQUIESCENT + IINPUTS + IDYNAMIC IC = ICC + ICC DHNT + ICCD (fCPNCP/2 + fiNi) ICC = Quiescent Current (ICCL, ICCH and ICCZ) ICC = Power Supply Current for a TTL High Input DH = Duty Cycle for TTL Inputs High NT = Number of TTL Inputs at DH ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL) fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices) NCP = Number of Clock Inputs at fCP fi = Input Frequency Ni = Number of Inputs at fi
4
IDT74FCT163344/A/C 3.3V CMOS ONE-TO-FOUR ADDRESS/CLOCK DRIVER
INDUSTRIAL TEMPERATURE RANGE
SWITCHING CHARACTERISTICS OVER OPERATING RANGE(5)
FCT163344 Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ tSK (b) tSK (o) Parameter Propagation Delay CL = 50pF Ax to Bxx RL = 500 Output Enable Time OEx to Bxx Output Disable Time OEx to Bxx Skew between outputs of same bank and same package (same transition)(3,4) Skew between outputs of all banks of same package (A1 thru A8 tied together)(3,4) Condition(1) Mil.(2) 1.5 1.5 1.5 -- -- Max. 6.5 8 7 0.75 1 FCT163344A Mil.(2) 1.5 1.5 1.5 1.5 1.5 Max. 4.8 6.2 5.6 0.5 0.5 FCT163344C Mil.(2) 1.5 1.5 1.5 -- -- Max. 4.3 5.8 5.2 0.35 0.5 Unit ns ns ns ns ns
NOTES: 1. See test circuit and waveforms. 2. Minimum limits are guaranteed but not tested on Propagation Delays. 3. Skew between any two outputs of the same package switching in the same direction. This parameter is guaranteed by design. 4. This parameter is guaranteed but not tested. Skew is not guaranteed when VCC <0.3V. 5. Propagation Delays and Enable/Disable times are with VCC = 3.3V 0.3V, Normal Range. For VCC = 2.7V to 3.6V, Extended Range, all Propagation Delays and Enable/Disable times should be degraded by 20%.
5
IDT74FCT163344/A/C 3.3V CMOS ONE-TO-FOUR ADDRESS/CLOCK DRIVER
INDUSTRIAL TEMPERATURE RANGE
TEST CIRCUITS AND WAVEFORMS TEST CIRCUITS FOR ALL OUTPUTS
6v V CC Open GND 500 VIN Pulse Generator RT D.U.T. 50pF 500 CL V OUT
SWITCH POSITION
Test Open Drain Disable Low Enable Low Disable High Enable High All Other Tests Open
3v16-link
Switch 6V GND
SET-UP, HOLD, AND RELEASE TIMES
DATA INPUT tSU TIMING INPUT PRESET CLEAR ETC. PRESET CLEAR CLOCK ENABLE ETC. tREM tH 3V 1.5V 0V 3V 1.5V 0V 3V 1.5V 0V 3V 1.5V 0V
DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
PULSE WIDTH
LOW -HIGH-LOW PULSE tW HIGH-LOW -HIGH PULSE 1.5V 1.5V
tSU
tH
PROPAGATION DELAY
SAM E PHASE INPUT TRANSITION tPLH OUTPUT tPLH OPPOSITE PHASE INPUT TRANSITION tPHL tPHL 3V 1.5V 0V VOH 1.5V VOL 3V 1.5V 0V CONTROL INPUT tPZL OUTPUT NORMALLY LOW SW ITCH 6V tPZH VIH VT 0V VOH OUTPUT 1 tSK(x) OUTPUT 2 tPLH2 tPHL2 tSK(x) VT VOL VOH VT VOL OUTPUT NORMALLY HIGH SW ITCH GND 3V 1.5V 0.3V tPHZ 0.3V 1.5V 0V 0V VOH tPLZ
ENABLE AND DISABLE TIMES
ENABLE DISABLE 3V 1.5V 0V 3V VOL
OUTPUT SKEW - tSK (x)
INPUT tPLH1 tPHL1
NOTES: 1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH. 2. Pulse Generator for All Pulses: Rate 1.0MHz; tF 2.5ns; tR 2.5ns. 3. If Vcc is below 3V, input voltage swings should be adjusted not to exceed Vcc.
tSK(x) = |tPLH2 - tPLH1| or |tPHL2 - tPHL1|
NOTES: 1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs. 2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank.
6
IDT74FCT163344/A/C 3.3V CMOS ONE-TO-FOUR ADDRESS/CLOCK DRIVER
INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION
ID T XX FCT XXX Fam ily XXX D evice Type XX P ackage
Tem p. R ange
PV PA PF 344 344A 344C 163 74
S hrink S m all O utline P ackage (S O 56-1) Thin S hrink S m all O utline P ackage (S O 56-2) Thin V ery S m all O utline P ackage (S O 56-3) O ne-to-Four A ddress/C lock D river
D ouble-D ensity 3.3V -40C to +85C
CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054
for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com*
*To search for sales office near you, please click the sales button found on our home page or dial the 800# above and press 2. The IDT logo is a registered trademark of Integrated Device Technology, Inc.
7

▲Up To Search▲

Price & Availability of IDT74FCT163344APA

	To Download IDT74FCT163344APA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .